Cut Sim To Nano Sim Template

I finally upgraded from a iPhone 4S to an iPhone five and didn't realize that the iPhone v takes a smaller sized SIM bill of fare than the 4S.  So I was surprised when it came and I couldn't put my old sim in my new phone.  Afterward doing some research online I realized I can make it work with a little trimming…

How to Cut a Micro Sim into a Nano Sim

Tools Needed:

The 4S takes what is referred to as a micro SIM and the 5 takes a smaller nano SIM.  Here's a comparison flick I took of some unlike sized SIMs I had laying effectually (the nano sim came with the telephone simply was not whatsoever good for me):

50 to R: Mini-Sim, Micro-Sim, Nano-Sim

At beginning I didn't think you could cut a Micro-Sim down to exist a Nano-Sim because you lot will need to cutting some of the metal traces off only subsequently after Googling the idea for a while I realized y'all can.  Here's how…

Stride 1: Download a template. There are many templates merely some are much meliorate than others.  I found a great template for drawing lines on the Micro-SIM to cut it downwardly hither (or a pdf here).  That link really has an image they borrowed from someone else but all the links to the original file are bad because the domain does non exist anymore.  Here's the template:

Sim cutting template

Y'all can download the epitome file directly here.

Step 2: Print the prototype at 100%.  If y'all are using a Mac, open up the image in Preview and then use the keyboard shortcut command-p to bring up the print dialog.  By default Preview volition try to conform the size to best fit the paper size just make sure to click on the "Scale" radio push button and enter 100 in the box as seen beneath.  It won't matter if it can't fit the entire image on the folio (if it gives yous a warning) because the stuff along the edge isn't important.  The important thing is the scale.

Gear up the calibration to 100%

You will know information technology printed at the right scale when your sim sits right down over the template and is the same size as the outline on the page.

Footstep 3: Record your Micro-Sim to the template.I didn't have whatever double stick tape so I simply rolled upwards some regular tape and cut it so it would be smaller than the sim:

You can brand yourself some double-stick tape like this

And here it is on the template:

My Micro-Sim Taped to the template

Step four: Use some kind of straight border and a fine permanent marking and describe the lines on the Sim to marker it for cut.  I used my old excursion schematics template equally the straight edge but I've seen where people just used a credit card.

My good old college straight border circuit schematic template

Make sure the sim doesn't move around and is centered over the outline of the sim on the paper.

Stride 5: Cut the Sim on the lines with a sharp scissors.This is the kind I used:

Heavy-Duty Pair of scissors

Here I have made a couple cuts:

2/5 washed

I kept referring back to the example I had of what size information technology should exist:

I was lucky to take a real nano sim to refer to just y'all tin can use the sim tray of your phone for reference

Footstep vi: Put the cut sim in the tray of your iPhone to check for size and cut a little more off if necessary.  If it is a tiny bit you need to cut off y'all tin can just apply your sandpaper to take off a footling more from the edge.  I also cut the corners off simply a tiny fleck to arrive non so sharp.

Step seven: Sand the Sim'south plastic side then that information technology is the same thickness as a nano sim. Note: don't sand the contact side!  I used 100 grit sand paper because that is the starting time sandpaper I came across in my workshop.  I wouldn't employ annihilation less than 100.  I would have preferred 200 actually but 100 worked fine.  An easy manner to hold the Sim while you sand it is to fold the end over on a piece of tape and then place the viscous side on the sim.

My tape tab for easy sanding

Use the tape tab to drag the sim across the sandpaper slowly (in the same management each fourth dimension) while pressing information technology down with my other fingertip, checking each fourth dimension to make certain you haven't taken too much off.  You lot will be able to vaguely see the Sim'southward chip begin to testify through the plastic equally you sand only make sure to finish short of exposing it.  Here's what mine looked similar when I stopped:

My sanded sim

I also sanded the edges and the corners a bit to make them dainty and polish.

Step viii: Clean upwardly the sim and put it in your iPhone.  Piece of cake.  Here'due south my finished product:

Directly Talk iPhone 4S Micro Sim cutting downwardly and sanded thin to fit in a iPhone v Nano Sim tray

All my "Sim Trimming" posts:

• How to Trim a Mini Sim Down to a Micro Sim
• How to Cut a Micro Sim into a Nano Sim (this post)

Amazon Acquaintance Disclosure: As an Amazon Associate I earn from qualifying purchases. This means if you click on an chapter link and buy the item, I volition receive an affiliate committee. The price of the item is the aforementioned whether information technology is an chapter link or not. Regardless, I merely recommend products or services I believe will add value to Share Your Repair readers. Past using the chapter links, you lot are helping support Share Your Repair, and I genuinely appreciate your support.

Source: https://www.shareyourrepair.com/2014/04/how-to-cut-micro-sim-into-nano-sim.html

Posted by: bishopknoton.blogspot.com

Share this post